iPhone 11 EMF Blocking Wallet Case with 5G Radiation Protection

Description

Shield Your Body from the Full Spectrum of Cell Phone Radiation Emissions

Your iPhone 11 transmits Radio Frequency (RF) radiation through its cellular, WiFi, and Bluetooth antennas, and Extremely Low Frequency (ELF) radiation from its battery and internal circuitry — every time it is powered on. These emissions are strongest at the points where the phone contacts your body: pocket, ear, hand, lap.

The DefenderShield® iPhone 11 Wallet Case puts a tested shielding layer at those contact points. The front cover contains Signature Shielding Technology — a multi-layer metallic composite that blocks up to 99% of directional EMF radiation up to 40 GHz. That covers ELF from the battery, cellular signals (2G through 5G mid-band), WiFi (2.4 GHz and 5 GHz), Bluetooth, GPS, NFC, and RFID. The shielding also addresses ELF from the battery — the frequency band most competing cases leave out.

Position the front cover between your body and the phone. Think of it like a lead apron at the dentist: the shielding protects what’s directly behind it, while the rest of your phone stays fully connected. Your cellular signal, WiFi, and Bluetooth remain unaffected.

Note: The iPhone 11 does not operate on 5G networks. The Signature Shielding covers 5G low- and mid-band frequencies to address ambient exposure from nearby 5G sources, but does not extend to all 5G high-band millimeter wave (24 GHz+). For mmWave coverage, see DefenderShield’s Ultra Armor+® cases for iPhone 12 and newer.

Built to Carry More Than Just Your Phone

The DefenderShield® iPhone 11 Wallet Case is a scratch-resistant vegan leather wallet with a textured diamond-grain microfiber interior. A detachable magnetic anti-shock nesting absorbs impact during drops and separates from the wallet for slim carry or car-mount use.

Three RFID-blocking card slots replace a separate wallet for daily carry of up to 9 credit cards and IDs, with an additional pocket behind for cash. The included clip-on wrist strap turns the case into a clutch. The back cover folds into a landscape stand for hands-free viewing, and a magnetic tab closure secures everything when not in use.

Available for iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max with precisely fitted camera cut-outs for full camera and flash access.

Features

🛡 Signature Shielding — RF and ELF Up to 40 GHz

The front cover blocks up to 99% of directional EMF radiation up to 40 GHz, covering ELF from the battery alongside RF from cellular, WiFi, Bluetooth, GPS, NFC, RFID, and 5G low/mid-band. This dual approach — RF plus ELF — is a shielding step most competing cases skip. The iPhone 11 does not use 5G networks, but the shielding covers ambient 5G low/mid-band exposure from nearby sources.

📱 Detachable Magnetic Anti-Shock Nesting

The inner anti-shock nesting snaps off the wallet magnetically for a slim standalone shell when EMF protection is not needed, and can be mounted directly on a DefenderShield Magnetic Car Phone Mount. When you need your cards and shielded cover back, snap the wallet on in seconds.

🔒 Three RFID-Blocking Card Slots

Carry up to 9 credit cards, IDs, and passes in 3 RFID-shielded slots that block contactless skimming. The case functions as a wallet replacement for daily carry, eliminating the need for a separate RFID sleeve or wallet.

📡 Full Connectivity — No Interference

The Signature Shielding layer is only in the front cover of the wallet case, letting. your iPhone 11’s cellular, WiFi, Bluetooth, and GPS connections all operate at full strength through the unshielded back and edges. The case reduces what reaches you without affecting what reaches your phone.

👜 Wallet, Wristlet & Stand in One Case

Three RFID-blocking card slots, a clip-on wrist strap for clutch-style carrying, a foldable landscape stand for hands-free video calls and streaming, and a magnetic tab closure to keep everything secure. One case replaces a phone case, a wallet, and a viewing stand.

🧪 Tested EMF Shielding Performance

DefenderShield’s shielding has been tested by an FCC-accredited facility with published results you can access HERE.

How to Use

Getting Set Up

1. Select your iPhone 11 model. The wallet case fits iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max. Make sure to check your phone settings (settings → general → about) to confirm your phone matches the phone model you are purchasing. Each case is precision-fitted for camera alignment, button access, and port clearance.

2. Secure your phone in the magnetic nesting. Align your iPhone with the anti-shock flexible nesting and press until it clicks securely into place. The nesting holds the phone magnetically to the wallet cover and protects against drops.

3. Load your cards and clip the wrist strap. Slide up to nine cards into the RFID-blocking slots, and place your cash in the larger pocket behind the slots. Attach the wrist strap for grab-and-go carry.

For Maximum EMF Reduction

• Always keep the front cover between your body and the phone. In a pocket, angle the cover against your leg. During a call, keep the cover between the screen and your ear. On your lap, face the cover against your leg. The shielding is directional — it works only when the cover sits between you and the device.

• Use Air Tube Earbuds. The case shields your body during pocket carry and your head during calls, but the Air Tube Earbuds can keep your phone and any RF or ELF signal even further away from your head during calls with a hollow acoustic tube

• Prop the phone up during screen time. The case folds into a landscape stand. Placing the phone on a desk or nightstand rather than holding it against your body creates distance — and distance directly reduces EMF exposure.

• Detach the nesting for car driving. Remove the wallet, mount the nesting on a DefenderShield Magnetic Car Phone Mount, and reattach the wallet when you park.

Care Instructions

• Wipe the cover with a soft, barely damp cloth. Avoid solvents and alcohol-based cleaners.

• To ensure your case stays in peak condition, please avoid bending the corner near the camera cutout. Because of the slim design in this area, keeping it flat will help maintain the case’s structural integrity over time.

• Dust with a dry lint-free cloth.

• Keep the magnetic closure clear of pocket lint for a reliable seal.

• Avoid forcing oversized items into the RFID card slots — stretching can affect the shielding material.

Specifications 

EMF Protection Specifications

Physical Specifications

Video

Watch the full product demo — see how the DefenderShield iPhone 11 Wallet Case positions Signature Shielding between your body and your phone while keeping cards, wristlet, and stand accessible for daily use.