WS2814 RGBW Addressable LED Strip Light 5m (16.4ft) DC12V/DC24V SMD5050 IP30 IP65 IP67 4-in-1 RGB+W 3-Pin

Brighten any space with programmable RGBW color and efficient pure white output — a flexible 5m (16.4 ft) LED strip available in multiple LED densities and waterproof options for indoor or outdoor use.

Specifications:

• Length: 5 m (16.4 ft) per roll
• LED Chip Model: SMD5050
• LED Density Options: 30 / 60 / 84 LEDs per meter
• Working / Nominal Voltage: DC 12V or DC 24V
• IC Quantity (per meter): DC12V 30LEDs/m = 10 ICs/m; DC24V 60LEDs/m = 10 ICs/m; DC12V 60LEDs/m = 20 ICs/m; DC12V 84LEDs/m = 28 ICs/m; DC24V 84LEDs/m = 12 ICs/m
• Cutting Length (per variant): DC12V 30LEDs/m & DC24V 60LEDs/m: 10 cm (3.94 in); DC12V 60LEDs/m: 5 cm (1.97 in); DC12V 84LEDs/m: 3.5 cm (1.38 in); DC24V 84LEDs/m: 8.25 cm (3.25 in)
• Color / Color Temperature: RGBW — Warm White 2400K, Cool White 6500K
• Luminous Flux: Approx. 2,000 – 82,000 lm (dependent on density and length)
• Beam Angle: 120°
• Power Consumption: Mixed RGB white: ~0.3 W per LED; Pure white: ~0.1 W per LED (varies by color mix)
• Gray Scale / Color Depth: 256 steps per color, 24-bit color
• Average Life: ~50,000 hours
• Ingress Protection & Mounting: IP30 (non-waterproof), IP65 (silicone coating, damp-proof, adhesive-backed), IP67 (silicone tube, waterproof — reseal after cutting; no adhesive tape; mounting with clips/screws recommended)
• Packaging: 5 m roll with 3-pin JST-SM connector; power supply and controller not included
• Addressability: WS2814 RGBW addressable in groups (one IC controls groups of 3, 6 or 7 LEDs depending on model) — not single-pixel individual control
• Compatibility: Works with common pixel controllers (e.g., SP617E / SP630E / SP639E / SP530E / SP539E) for chasing, rain, flow and other effects
• Installation Notes: Chainable via 3-pin JST-SM connectors; every 0.5 m may include solder joints; follow recommended cutting points and reseal IP67 after cutting
• Package Contents: 1 × 5 m (16.4 ft) WS2814 RGBW LED strip, 1 × 3-pin male JST connector (power supply and controller sold separately)
• Important: Use appropriate DC12V or DC24V power supply and a compatible pixels controller. Verify color order and required voltage before installation.

#LEDStripLights #RGBW #AddressableLED #FanzyMarket